Transfer credits and GPA on a new scale
A new school can accept credits toward a degree and still start your GPA at zero. Another school can import the old average. A third problem, often mixed in with the first, is that the old courses were scored on a different chart. This page keeps those decisions apart and shows the arithmetic for each one on the tables GPACalcy actually uses.
Updated November 2, 2026
Two columns that share a word
"Credits" on a transfer evaluation is not one bucket. Degree credits, sometimes called credits accepted or credits toward the program, answer whether a course fills a requirement. GPA credits, sometimes called graded credits or GPA hours, answer whether that course has quality points inside the new average. A line can be large in the first column and zero in the second.
The calculator only has the second idea. The previous-credits box is the credits inside the GPA you typed, not every credit the degree audit is willing to count. Putting accepted-but-excluded transfer credits into that box dilutes the average with credits that never had grade points. The new term then looks weaker than the registrar's math, or stronger, depending on the old GPA you invented to go with them.
Read the evaluation before you type. Useful phrases are "GPA hours: 0," "prior GPA not included," "transfer grades do not calculate," or a posted cumulative GPA that already includes the old work. If the document is ambiguous, ask the registrar. GPACalcy cannot see the evaluation and will not guess a policy. The formulas on About are the page's math, not a college's.
The same new term, two policies
A student brings 36 credits the new college accepts. The first term there, on a 4.0 chart, is Seminar A (4.0, 3 credits), Lab B+ (3.3, 1 credit), Economics B (3.0, 3 credits), and Writing A− (3.7, 3 credits).
| Course | Points | Credits | Quality points |
|---|---|---|---|
| Seminar | 4.0 | 3 | 12.0 |
| Lab | 3.3 | 1 | 3.3 |
| Economics | 3.0 | 3 | 9.0 |
| Writing | 3.7 | 3 | 11.1 |
| Term total | 10 | 35.4 |
Term GPA = 35.4 / 10 = 3.54. That line does not depend on the transfer policy. It is the courses taken at the new school. What the policy changes is the cumulative GPA, and what you are allowed to call "my GPA" on a form from that school.
Policy A: the old GPA stays out
The evaluation says the 36 credits count toward the degree and "GPA hours: 0. Prior GPA not included."
There is no previous quality-point total to rebuild. After this term the cumulative GPA at the new school is 3.54 on 10 GPA credits, the same as the term. The degree audit may show 46 credits toward graduation. Those extra 36 are not in the denominator. On the calculator, leave Include previous GPA unchecked. Enter the four new courses. Read 3.54. Do not type 36 anywhere.
Students often try to be thorough and put the old record in anyway. Suppose the old cumulative GPA was 3.20 on 36 graded credits, which is 115.2 quality points, and someone adds it under the new term. Combined quality points = 115.2 + 35.4 = 150.6. Combined credits = 46. The displayed cumulative GPA is 150.6 / 46 = 3.2739, shown as 3.27. That 3.27 is the correct figure only for a school that imported the old GPA. For Policy A it is a fiction. The gap between 3.54 and 3.27 is not a rounding choice. It is 36 credits that do not belong in the average.
Policy B: the old GPA is imported
The evaluation lists a cumulative GPA of 3.20 and 36 GPA credits, and the catalog says transfer grades calculate.
Now the 3.27 is the new cumulative GPA, and 3.54 is still the term. Check Include previous GPA, enter 3.20 and 36, and enter the four courses on the 4.0 scale in Unweighted mode. The semester line should read 3.54. The cumulative line should read 3.27. Report them with those labels. A scholarship that asks for the GPA at the new school, after the import, wants 3.27 once the term is posted. A dean's list that reads the term wants 3.54, and it may also require more than 10 graded credits. The semester versus cumulative guide is about that second split. This page is about whether the old school is inside the pool at all.
Importing is not the same as re-scoring. Policy B uses the GPA the sending school already computed, on that school's chart. If the new school instead recomputes each course on its own chart, you do not type 3.20. You type the courses the way the evaluation restated them, or you leave the calculator and follow the evaluation's posted total. Mixing a 3.20 from one chart with new courses on another chart builds a number neither office uses.
A different scale means new points, not a multiplier
Some transfers are not "did the credits come across?" They are "these letters were worth different points." The scale-conversion guide shows why 8.5 × 0.4 is not a 4.0 GPA on this site's tables: 8.5 is a B on the 10.0 chart, and a B on the 4.0 chart is 3.0. The same warning applies to a finished transfer GPA. If you do not have the courses, you have a number on the old scale and you should say so. You should not publish a homemade 4.0 equivalent beside it.
When you do have letters, rescore each one. This example is a teaching exercise on GPACalcy's charts, not an official evaluation. Four courses the student can still see on the old transcript: Physics A, 4 credits; Language B+, 3 credits; History C+, 3 credits; Design A−, 2 credits.
On the 4.0 chart, quality points = 4.0 × 4 + 3.3 × 3 + 2.3 × 3 + 3.7 × 2 = 16.0 + 9.9 + 6.9 + 7.4 = 40.2. Credits = 12. GPA = 40.2 / 12 = 3.35. On the 10.0 chart the same letters are 10.0, 9.0, 7.5, and 9.5. Quality points = 40 + 27 + 22.5 + 19 = 108.5. GPA = 108.5 / 12 = 9.0417, shown as 9.04. The shortcut 9.04 × 0.4 = 3.616, which is not 3.35. Rescoring the letters is the method. Scaling the average is a different question, and here it is the wrong answer.
A mark that is only a number, such as 9.6 with no letter, is not yet something this calculator can eat. The 10.0 menu has 10.0 for an A and 9.5 for an A−. It has no 9.6 key. If the old school called 9.6 an A, you still need the receiving school's band before you select A on a 4.0 menu. Selecting A because 9.6 "feels like an A" invents a chart. If the receiving evaluation already printed a letter, use that letter and the credits on that line.
Plus and minus cuts travel badly. A sending school with no minuses can record a B that a receiving school would have split into B+ and B−. You do not downgrade the B to a B− because the new campus "uses minuses." You enter the letter the evaluation kept. If the evaluation is silent and you only have the old letter, say the GPA is on the old chart. The conversion guide makes the same point about an example percent table: it is for marks that do not yet have letters, and it is not your syllabus.
The credit value can change even when the letter does not
Quarter-hour campuses and semester-hour campuses do not always count a course as the same number of credits. The evaluation is the authority for the new value. A rule of thumb you found elsewhere is not a formula this site runs, and it is not something to type until the evaluation agrees.
Suppose the evaluation converts one old course, an A, into 3 semester credits. If the new school awards grade points, and an A is 4.0, that course contributes 4.0 × 3 = 12 quality points. The old value might have been 5 quarter credits. Using 5 inside the new GPA would contribute 4.0 × 5 = 20 quality points and would overstate the course by 8 quality points. On a first term of 12 GPA credits, those 8 points are most of a letter grade on the cumulative average. Enter the credits the evaluation assigned.
If the evaluation says "CR," "T," or "pass" and prints no grade points, the course is Policy A for that row even when other courses were imported. It fills a requirement. It does not enter the GPA. The calculator has no Pass grade. Leave the row off. Entering it as an A creates quality points the new registrar never stored. The term guide says the same thing about pass/fail inside one school. Transfer credit is that rule with a second institution's stamp.
Repeats do not cross a campus by themselves
A student who earned an F in calculus at the first school, worth 4 credits and 0 quality points, and then earns an A in calculus at the second school, does not automatically replace the F. Replacement is a policy at the school that still holds the F. If the new school never imported the F, the A is simply a new course in a new GPA. The old school's GPA still contains the F unless that school's catalog removes it and someone there processes the repeat. You can be looking at two GPAs. Averaging them, or typing the F into the new school's calculator "so the replacement shows up," describes neither office.
If you are still enrolled at the school that holds the old attempt, and that catalog removes the first try, adjust the previous GPA yourself before you add the new attempt. Subtract the old quality points (0, for an F) and the old credits (4) from the previous totals, then add the new A as a row. Do that only when the catalog says the old attempt leaves the GPA. The raising guide uses the same adjustment. This calculator cannot see a hidden F and delete it.
Grade forgiveness, academic renewal, and "repeat for credit" are three different sentences in three different catalogs. One of them drops the first grade. One of them averages both. One of them keeps the first grade forever and lets the second course count only as elective credit. The evaluation or the catalog sentence is the instruction. A planning total that ignores it will not match the posted GPA, and averaging the two totals will not repair the mismatch.
What you can say after you transfer
You can say "my first term at the new school is 3.54 on 10 GPA credits." You can say "the evaluation accepted 36 credits toward the degree and excluded them from the GPA," or "the evaluation imported a 3.20 on 36 GPA credits, and the cumulative GPA after this term is 3.27." You can say "on GPACalcy's 4.0 chart, these four letters and 12 credits produce 3.35," if that is the exercise you actually did.
You cannot honestly say the new school GPA "includes my old 3.20" when the evaluation shows zero GPA hours. You cannot say a 10-point average became a 4.0 GPA because you multiplied by 0.4. You cannot repair a quarter-to-semester credit change by keeping the old credit number and the new letter. Evaluators who rescore transcripts will use their own chart. Handing them a homemade equivalent can conflict with that rescore.
International records are the sharp version of the same limit. A receiving admissions office, or a service that office names, publishes the method it uses when it publishes any. GPACalcy is not that office. It will apply the 4.0, 5.0, and 10.0 tables on the homepage to letters you select. It will not store the courses, and it will not turn the result into an admissions chance. If a handbook and this page disagree, follow the handbook.
Related guides
- Scale conversion — why a multiplier on the finished average misses this site's charts.
- Cumulative GPA — how previous credits have to be GPA credits.
- Semester vs cumulative GPA — the term line and the record line, once you know which school is in the pool.
- How to calculate GPA — pass/fail, withdrawals, and the credit-weighted division.